|Drop-On-Demand Piezoelectric Technology
|(180 nozzles*8 lines)*1 head
|Height of print head
|adjustable from 1.5mm to 2.5mm
|ink supply method
|Feed up method
|Multi-press feed paper
|Poster, Banner, mesh, PVC vinyl, perforated vinyl, photo paper, backlit film
|Sublimation paper, fabric, polyester fleece blanket, shower curtain, Etc
|Media width max
|Print width max
|Print margin minimum
|Print resolution & print speed
|540*720dpi (6 pass)
|Media roll outer diameter
|2 inch or 3 inch
|The heaters for front and center platform separately
|Single paper (feed front), Roller paper (feed rear)
|Max weight for roll media
|Standard printer languages
|Ac100-120V&Ac220-240V (Adaptive) 50/60Hz+/-1Hz
|Temperature: 20℃~32℃; Humidity: 40%~60%
|Weight of printer
|Packing & Delivery:
|Weight with packing
|To be packed with Timber with fumigation certificate
|One set per order
|7 working days after receive the deposit
|Instruction: Epson DX5 Resolution: 1440DPI
|Color: 4 colors
|Print mode: 4, 6, 8, 12 Pass
|A: Operators need to make antistatic treatment, please wear the Anti-static devices if permission, to prevent the high static load from burning the circuit board inside print head.
|B: During installation, try not to directly touch the surface of print head.
|Eco solvent printer main board
|Introduction: EPSON DX5 and DX7 eco solvent printer main board.
|Usage: Send printing data signal, control the operations of main parts.
|A: Resist dirt and moisture for the main board.
|B: Turn off the power when check the main board. Mark the plug signal line and supply line to avoid connection mistake which can burnout the main board.
|C: Please do not break or weld the spare parts on the main board personally.
|Eco solvent printer print head board
|EPSON DX5 and DX7 eco solvent printer print head board.
|Usage: Receive printing data signal and control inkjet and voltage of the print head.
|A:Resist dirt and moisture for the print head board.
|B: The print head cable must be inserted into the right place; otherwise it may burnout the print head.
|C: Please do not weld or dismount any spare part on the print head board personally.
|Introduction: Auto-feed, keep the material tension balance, make the material pass through the print platform smoothly and do nice printing work.
|A:. When printing materials, rigidly fix the material and sheet feeder shelf.
|B: Try to put the material in middle of the platform, make the material get equal force by the roller, so it can pass through the print platform smoothly.
|C:Keep a clean and tidy environment surrounding the sheet feeder; do not interfere with the feeding process.
|Introduction: 2 Liter ink cartridge, provide the ink continuously which is very convenient. Ink color is clear, so it is not easy to add the wrong color ink.
|A: Make sure each color ink to the corresponding ink cartridge.
|B: It is enough when the ink reaches 3/4 of the cartridge.
|C: Be careful not to dirty machine and ground when add ink; seal the lid on time after add ink.
|Suction and heating device
|Introduction: Automatic suction when printing which can make the print materials adsorb to the platform better, so the heater can heat and dry the printed material more evenly.
|A: Keep the suction plate clean and tidy.
|B: Adjust the suction strength before printing, as well as proper heating temperature.
|C: Do not touch the heating plate when printing.
Excellent After-sale Services:
1.One year warranty
You can discuss operation and maintenance with our technician online support service by Skype, MSN etc. Remote control will be provided upon request.
2. Free exchange of new components
Our quality is guaranteed 100%, the spare parts can be replaced within one year free of charge includes the airfreight by express, except for the print head and some consumable parts.
3. Free online consultation
The technician will keep online. No matter what kind of technical questions that you may have, you would get a satisfactory answer from our professional technician easily.
4. Free onsite installation and training
If you are able to help us with getting the visa and also would like to bear the costs involved like flight tickets, food, etc, we can send our technician to your office, and to give you a free installation and training for as long as you know how to operate it